Skip to main content

New 'Artificial Leaf' That Converts Carbon Dioxide Into Fuel



Scientists have created an “artificial leaf” to fight climate change by inexpensively converting harmful carbon dioxide (CO2) into a useful alternative fuel.

The new technology, outlined in a paper published on November 4, 2019, in the journal Nature Energy, was inspired by the way plants use energy from sunlight to turn carbon dioxide into food.

“We call it an artificial leaf because it mimics real leaves and the process of photosynthesis,” said Yimin Wu, an engineering professor at the University of Waterloo who led the research. “A leaf produces glucose and oxygen. We produce methanol and oxygen.”

Making methanol from carbon dioxide, the primary contributor to global warming, would both reduce greenhouse gas emissions and provide a substitute for the fossil fuels that create them.

The key to the process is a cheap, optimized red powder called cuprous oxide.

An hour-long chemical reaction creates the engineered red powder that is the key to new technology to turn carbon dioxide into fuel. Credit: University of Waterloo

Engineered to have as many eight-sided particles as possible, the powder is created by a chemical reaction when four substances – glucose, copper acetate, sodium hydroxide and sodium dodecyl sulfate – are added to water that has been heated to a particular temperature.

The powder then serves as the catalyst, or trigger, for another chemical reaction when it is mixed with water into which carbon dioxide is blown and a beam of white light is directed with a solar simulator.

“This is the chemical reaction that we discovered,” said Wu, who has worked on the project since 2015. “Nobody has done this before.”

University of Waterloo Engineering professor Yimin Wu. Credit: Brian Caldwell

The reaction produces oxygen, as in photosynthesis, while also converting carbon dioxide in the water-powder solution into methanol. The methanol is collected as it evaporates when the solution is heated.

Next steps in the research include increasing the methanol yield and commercializing the patented process to convert carbon dioxide collected from major greenhouse gas sources such as power plants, vehicles, and oil drilling.

“I’m extremely excited about the potential of this discovery to change the game,” said Wu, a professor of mechanical and mechatronics engineering, and a member of the Waterloo Institute for Nanotechnology. “Climate change is an urgent problem and we can help reduce CO2 emissions while also creating an alternative fuel.”

Wu collaborated on the paper, Facet-dependent active sites of a single Cu2O particle photocatalyst for CO2 reduction to methanol, with Tijana Rajh and other researchers at the Argonne National Laboratory in Illinois, as well as scientists at California State University, Northridge, and the City University of Hong Kong.

Source: SciTech Daily

Comments

See Also

Personality of The Week: Dr Frank Ofori Agyemang

Dr F.O. Agyemang, MATESA POTW Meet Dr Frank on this week's  Personality Dialogue show. He tells us about himself, shares his knowledge and experience with us. This is an exclusive, in-depth interview with the nanomaterials expert, deliberately enjoy the show to the very end. Who is Dr Frank Ofori Agyemang? I am from Jakobu, a town in Amansie Central district close to Ashanti Bekwai, Obuasi Road. I have a large family, with many step siblings. My dad passed away while I  was writing my PhD dissertation. I am married with a kid. Well done Doc Please tell us about your education. Growing up I have always loved to be an engineer. We were the first batch of WASSCE students (2006). I completed Kumasi Academy, popularly known as Kumaca. Before I applied for admission to KNUST, I read a lot about the programs I chose, including Materials Engineering though Pharmacy was my first choice. Before I chose MSE, a friend who was schooling outside introduced me to it, I th...

The Chemistry between Matter and Communication

[Opinion - 5 min read] In this article, I use communication and language; matter and material interchangeably. Basically, both are related in this way – without matter, there is no communication, meaning that matter is the object of communication. The aim of this write-up is for us to appreciate the fact that communication is a key factor in our daily living and hence we must pay critical attention thereof. Let's understand some underlying terms herein as we move on. Communication is the means by which different matter relate with other; it can be verbal or non-verbal, interpersonal or intrapersonal, etc. We communicate mainly through our actions, speech and thoughts. Matter is what makes up the physical world; the things that can be seen or felt, including people and other material in the environment. [Read also: Dear Writer!  ] Having gotten these, let us now look at how communication (language) affects material (matter) in these four well-known areas: Busin...

Personality of The Week: Julius Boakye Kakrah

Our Personality for this week is an outstanding gentleman who aspires to be a magnate in the field of Mining. Aside sharing with us his knowledge and experience, he reminisces a humorous experience at his alma mater and you just want to read the interview to the end. Mr  Julius Boakye Kakrah Who is Mr Julius? I am Kakrah Boakye Julius, born on May 22, 1998. I hail from Bekwai in the Ashanti Region of Ghana. I am the last born of four children. What was your experience like in secondary school? I am an alumnus of St. Augustine's College in Cape Coast and I offered General Science. I had many experiences but one I really remember is my first 3 weeks in school. I looked much like someone who has been in the school for long so I usually used to send and punish my own mates.  St Augustine's College also helped me shape my lifestyle especially the way I dress. Metallurgical Engineering, were you given the programme or you really wanted to do it? What informed your dec...

Personality of The Week: Dr. Mensah-Darkwa

Our Personality for this Week is none other than Dr. Kwadwo Mensah-Darkwa. Below is a profile of the senior lecturer popularly known as Dr. Darkwa.  PROFILE SUMMARY Dr. Kwadwo Mensah-Darkwa (KMD), is a senior lecturer at the Department of Materials Engineering, KNUST. He is also the College Examinations Officer. His offices are located at PB 319 and the College Examinations Office. Some of the courses he teaches include Introduction to IT, Strength of Materials, MATLAB, Numerical Methods. He is quite known among his students to be IT-oriented due to the  neoteric gadgets he employs in his lectures. EDUCATIONAL BACKGROUND He studied General Science  at Ghana National College ,  Cape Coast, where he obtained his SSCE . He then gained admission to KNUST  to read B.Sc. Mechanical Engineering  where he completed in  June 2004  with First C lass H ono urs degree. At the North Carolina A&T State University (NCAT), Greensb...

Personality of The Week: Mr Ebo Quansah

Mr Ebo Quansah, Personality of The Week To  begin this month's Alumni Awareness session of the Personality Dialogue a former Teaching Assistant of the Department. He is an old student of GSTS in Takoradi. He tells us about himself and shares with us some knowledge and experience so far. Enjoy the read. Who is Mr Ebo Quansah?  Ebo-Quansah is the second born among five siblings. I was born and brought up in Manso-Wassa, where I had my basic education. I am that individual who is interested in researching into scientific problems. What was your experience like in secondary school? I had my Secondary school education at Ghana Senior High Technical School (GSTS). And you can attest to the fact that GSTS is one of the finest second cycle institutions in the country. Besides the quality of academic work, the high level of discipline the school instigates into its students really helped shape my life. For that I will always be proud of my alma mater. Talking of fond memorie...

MATESA SPORTS SEAT - Exclusive Interview

Mr Kwame Attakora-Seater of The Week This is the maiden edition of Sports Seat. It is an exclusive interview with the Sportsmen of MATESA - published weekly. The first interviwee to sit on Sports Seat is Mr Kwame Boakye Attakora. He tells about himself, MATESA and also sports (football). Who is Mr Kwame Boakye Attakora? I have always found this question very complex to answer mainly because as a person I am constantly evolving as a result of my experiences but I guess basically i am a Fante-Ashanti boy working towards making my hopes and dreams a reality. What was your experience like in secondary school? Secondary School was fun, like all my experiences. I was in Achimota School between 2010 and 2013. Funny thing is I didn’t actually plan on going there. Growing up my dream secondary school was PRESEC, Legon but I ended up at Achimota due to an error on my part when I was selecting secondary schools to attend. I chose PRESEC, Legon but mistakenly wrote down the Ac...

The Reason for The Season

Almighty, you could have snapped us into a blip to avenge for our unruly stubbornness and cruelty. You could have hypnotized us from the beginning of time to follow you with nothing called free will. No urge to disobey, steal or kill. But you chose to send your begotten son. In the beginning, you could have corrected sin and immorality yet allowed men to dwell in their carnality and later show them your sovereignty. Leaving His comfort zone, He came down to live as one of us. He was betrayed for a few denominations, chastised on several occasions but chose our salvation over condemnation. And for our sake He was condemned to death. To the wisdom of man, it was an improper fraction but to God a perfect solution.Though sinless and blameless, He bore the crossed burdened with our sins. Under the Heavy cross bathed in blood and sweat, he fell three times yet didn’t give up. He was poised to accomplish this mission of our salvation. Nailed to the cross, blood oozing from every part o...

Personality of The Week: Mr Asare Bediako

Asare Bediako - POTW On today's Personality Dialogue train we meet a very fine gentleman who is also the Rep for  his class - Metallurgical Engineering 1. He shares with us his knowledge and experience. Kindly enjoy the interaction. Who is Mr Asare Bediako?  Asare Bediako is a positive young gentleman who is self-motivated and passionately aspires to make a change in society. He is strongly interested in Youth Activism, Entrepreneurship and Leadership. What was your experience like in secondary school? I attended Adventist SHS in Bantama. It was a great and quite an interesting place to be. I was famously tagged "The king of Latin," because I always loved and used Latin quotes in all formal speeches I made. Metallurgical Engineering. Were you given the programme or you really wanted to do it? What informed your decision if you chose it? My dream program was Pharm D. I was not interested in metallurgy when it was first offered me; I had no passion to offer t...

Personality of The Week: Ing. Dr. Mrs. Bennetta Koomson!

Dr Bennetta Koomson, Personality of The Week Our Personality of the Week is a dainty, gorgeous, and adorable lecturer of the Department, Ing. Dr. Mrs. Bennetta Koomson, popularly known as Dr Koomson. Get to know about her. Profile Ing. Dr. Mrs. Bennetta Koomson is a Minerals Engineer and a lecturer of the Department of Materials Engineering. She began lecturing at KNUST in 2012. Her office is in Room 325 of the Petroleum Building (PB). Education She had her B.Sc. in Minerals Engineering at Kwame Nkrumah University of Science and Technology (KNUST). She also holds an MPhil and PhD in Minerals Engineering where she studied at the University of Ontario Institute of Technology and the University of South Australia, but her degrees awarded by the University of Mines and Technology (UMaT), Tarkwa. In her PhD study, she worked on a research project:  “ Nanolithosorption of arsenic from mine waters ,” together with other renowned scientists and engineers: E. K. Asiam, Willi...